Of all the different wearable items that could be embroidered, jackets would appear to be the easiest. When most of think of jackets with regard to embroidery, large areas for thriller jacket full back again and left chest designs come to mind. What many of us often forget are the little curveballs apparel producers are adding to their designs such as field pleats and seams down the back. Fashion forward styles may have things like raglan sleeves which can throw off design placement since they lack the guideline of a shoulder seam.
One sure way to start out with a jacket that is fit for embroidery is to focus on working with styles that provide the fewest headaches. As a result, do some research on the most recent trends. In addition, start with a machine that’s in first class condition, with fresh new needles and bobbins. Below are the other basic elements to take into account in your quest for trouble-free jacket embroidery.
Choosing a hoop
The best choice in hoops for jackets is the double-great hoop. This hoop is taller compared to the average hoop so offers additional holding power. It is possible to wrap your hoop with light floral tape, professional medical gauze, twill tape or bias tape to avoid hoop marks and help give a snug fit. Tissue papers, backing or waxed paper could also be used. Hoop these materials along with the jacket, subsequently cut a windows for the embroidery. A thin layer of foam under the tape may also help. But stay away from masking tape as it tends to be sticky and results in a residue on coat and hoop. When choosing your hoops, remember that oval hoops hold better completely around than carry out square hoops with oval corners. The “square oval” keeps better in the corners than on the sides, major and bottom.
The size and type of needle will depend on the fabric of the coat. Leather jackets call for an 80/12 razor-sharp. (Wedge shaped “leather” needles have a tendency to do more harm than good.) Use this same razor-sharp needle on poplin and other cotton-type jackets. Use a 70/10 or 80/12 light-weight ballpoint on nylon windbreakers and a 75/11 fine ballpoint on satins and oxford nylons in order to avoid runs in the fabric. Large wool jackets, canvas and denim jackets need a stronger razor-sharp needle. Corduroy stitches very well with either ballpoint or sharp. Remember that ballpoint needles nudge the material out of the way to be able to place the stitch, while sharps cut through the fabric. A good rule of thumb is by using the same sizing needle to embroider as you’ll to sew the seams of the jacket in assembly.
As for thread, polyester is a superb choice for embroidery on jackets that will be exposed to the elements and coastal climates. Make sure to include washing and dry washing instructions with your finished product. Consider choosing a large-eye needle when working with metallic along with other heavy specialty threads
Placing the design
Hold a straight-edge across the jacket back from aspect seam to side seam at the bottom of the sleeves. Mark a horizontal straight line, next double check this with a measurement from the bottom of the jacket to the same line. Jackets are not always sewn together straight. Measure the straight line and divide in half to obtain the center of the coat. Place a vertical series through the horizontal line at this point. The intersection of the two lines will be the center. If you are rotating the look to sew upside-down or sideways, take this under consideration when measuring and afterwards when hooping. Work with tailor’s chalk, disappearing ink pens or soap to tag your garments. Avoid using pins. Masking tape is available in slim strips at graphic and fine art stores. It is easy to remove and leaves no marks. Wider masking tape, though, can leave residue.
Centering the design eight inches down from the back of the collar is a great place to start, and really should work with most jackets. Small sizes can do better at six inches; large ones may find yourself at 10 inches. The very best of the look should fall about 2 ï¿½ inches along from the collar of the coat. But remember that this can change if the jacket includes a hood. Then it will be necessary to place the design below the hood.
The simplest way to determine the center point of the design is to have someone try the coat on, or choose mannequin. Pin an outline of the design or a sew-out to the back, making sure to include lettering and graphics to determine size and placement. Left or right chest styles should be centered three to four inches from the edge of the jacket and six to eight down from where the collar and the jacket human body intersect. When embroidering on jackets with snaps or buttons, utilize the second snap or button as a guide.